Contact Kulzer Technik
-
Phone
+49 (0) 6181/ 9689-2570
Technovit®-2-Bond
The fast 2-component PU adhesive for claw treament
Technovit-2-Bond is a two-component adhesive on polyurethane-basis, which has been developed for the treatment of claw diseases in cattle. The adhesive is used to bond a block of wood to the healthy claw of the animal, in order to relieve the sick claw and to speed up the healing process.
Benefits
- The 2-component adhesive Technovit-2-Bond does not require a separate mixing process and can be applied immediately after preparation to the claw
- The light-pasty viscosity prevents the spilling out of the adhesive on the claw and block
- The processing time of 20 - 30 seconds and a curing time of about 3 minutes enables a quick claw treatment and is consequently less stressful for the animal
Good to know
- A well-prepared claw contributes to a good and stable adhesion of the adhesive. The claw can also be roughened to increase the adhesive force
- The used mixing tip can remain on the cartridge after the application. The adhesive in the tip cures out and as such seals off the cartridge. A new mixing tip must be used in the next application
- The exerted pressure must not be too high when pressing the block of wood on to the claw, since the resulting adhesive layer will be too thin and no optimum adhesive bond can be formed