Contact Kulzer Technik
-
Phone
+49 (0) 6181/ 9689-2570
/materialographie/einbetten/warmeinbettsysteme/technotherm-3000-image-640w-360h.jpg "Technotherm® 3000")
Technotherm® 3000
Conductive hot mounting resin
Technotherm 3000 - Optimum conductivity, hardly any voltage losses, THE ideal embedding resin for electrolytic polishing. Technotherm 3000 is based on a graphite filler and thus guarantees optimum conductivity with very low shrinkage. Technotherm 3000 is the conductive material of the Technotherm line. Technotherm 3000 is used wherever high conductivity is required (e.g. in scanning electron microscopes). When testing in the SEM, Technotherm 3000 virtually eliminates voltage losses (less than 0.5%). Technotherm 3000 is also the ideal embedding resin for electrolytic polishing
Benefits
- black
- conductive
- No hazardous substance, there is no danger during application, processing, storage and transport.
Good to know
/materialographie/einbetten/warmeinbettsysteme/technotherm-3000-curing-table-1600-x-900-image-640w-360h.jpg "Technotherm 3000 Curing table")
Practical tip
To prevent hot embedding resin from adhering to the punch of the press, brush the press cylinder with Solilub.
Additional Products
/materialographie/einbetten/warmeinbettsysteme/solilub-packshot-dose-1600-x-900-image-640w-360h.jpg "Solilub")
Solilub - anti adhesive
Solilub powder prevents the hot embedding material from sticking to the punch of the hot embedding press.
/materialographie/einbetten/equipment-einbettsysteme/presslam-1-1-image-1280w-720h.jpg "PRESSLAM® 1.1")