Phone+49 (0) 6181/ 9689-2570
High viscosity, transparent resin for filling surface damage up to 10 mm depth, for use as an underfilling or for repairing unglazed component parts. Cures within 10 seconds under blue light.
Cordless curing light with a powerful and stable Li-Ion battery. The curing time is easily set on the handpiece of the Pekalux POWER LED. There are four irradiation modes available. At the end of the set time, the Pekalux POWER LED switches off automatically. The high light output up to 3.000 nw/cm2 leads to deeper curing in less time. It consists of high performance electronic components for a long life and reliable usage. Due to the powerful light output the curing time of Technovit colors is only 10 seconds. A Pekalux POWER LED power adapter is available as an option.
One-phase primer used to chemically bond polymers to ceramics. The Primer RC prevents gaps from forming between the ceramics and the repair material, and significantly increases the quality of the repair. To achieve the best resistance against dust, water and temperature variations, it is generally recommended applying Primer RC for all repairs.
Continuously variable rotation tool that is suitable for all grinding and polishing instruments. The unit is operated by a powerful Li-Ion rechargeable battery and is easy to operate in a controllable way through the ergonomically cased housing.
Rechargeable battery for the Kerasys Dremel. The parallel charging of the second battery makes continuous repair work possible while discharging the battery that is being used.
Quick-action drill chuck to screw onto the Kerasys Dremel. Suitable for all shank diameters of sizes 0.4–3.5 mm.
Drill specifically designed for grinding ceramic surfaces with pinholes, cracks or soot particles. The drill is used by applying slight pressure and operates in short cycles at speeds of 2000 –3000 rpm.
Felt polisher with diamond wax for mirror polishing of repaired defects or dull areas on ceramic surfaces.
A special silicone grinder for grinding the surfaces of areas that require repair – operates at speeds of 2000 – 3000 rpm. The surface hardness of the Silico Grinder has been chosen to ensure that only Technovit resin – but not the ceramic surface – is removed. Silico Grinder must be grinded into shape with the included white trimming stone before first use.
Films to cover the filled repair area before polymerization. The film is used to exclude oxygen during polymerization, to increase surface hardness and to achieve a mirror finish.
Tool used for modelling Technovit repair pastes with different shaped ends and an ergonomic handle for optimum ease of application. The Plasmacoat Instrument is covered with a special coating to prevent Technovit resins from sticking to it.
Gel which has to be applied before light curing to cover areas which were filled with the resin. The Insulating Gel is used to exclude oxygen during polymerization, to increase surface hardness and to achieve a mirror finish.
Can also be used as an alternative to the Silico Grinder.